{
"schema_version": "1.0",
"claims": [
{
"id": "edge-access-narrow-profile",
"category": "access",
"claim": "The 3.5\" drum and narrow working profile reach leading-edge inside radii and tight rivet borders that a 7\" pad cannot.",
"metric": "Reach into tight radii and confined areas",
"drum_value": null,
"rotary_value": null,
"unit": "qualitative",
"status": "derived",
"evidence_type": "spec-sheet",
"source": "Drum diameter 3.5\" + narrow profile (Lucid product description verified 2026-05-25)",
"audience": [
"operator",
"detailer"
],
"notes": "When Derek photographs the tool on a Citation leading edge, add measured min inside radius in inches."
},
{
"id": "sleeve-msrp",
"category": "consumables",
"claim": "Lucid drum-buffer sleeves are $27.50 each across three variants: wool, cotton, 50/50 blend. Sleeves fit the Lucid axial drum only; they do not fit standard rotary or orbital polishers.",
"metric": "Sleeve unit price",
"drum_value": 27.5,
"rotary_value": null,
"unit": "USD",
"status": "verified",
"evidence_type": "published-price",
"source": "https://store.lucid-aero.com/products/drum-buffer-buffing-sleeves (verified 2026-05-25)",
"audience": [
"operator",
"owner",
"distributor",
"detailer"
]
},
{
"id": "drum-buffer-msrp",
"category": "cost",
"claim": "The Lucid Aero Compact Drum Buffer retails at $2,426 (sale; $2,699 regular).",
"metric": "Lucid drum buffer price",
"drum_value": 2426,
"rotary_value": null,
"unit": "USD",
"status": "verified",
"evidence_type": "published-price",
"source": "https://store.lucid-aero.com/products/lucid-aero-compact-drum-buffer (verified 2026-05-25)",
"audience": [
"operator",
"owner",
"distributor",
"detailer"
]
},
{
"id": "tco-vs-7-inch-pneumatic",
"category": "cost",
"claim": "Total entry cost for the 3.5\" Lucid pneumatic drum buffer is far below a comparable 7\" pneumatic buffer once required compressor capacity is included.",
"metric": "Total cost of entry — buffer plus minimum compressor",
"drum_value": 2426,
"rotary_value": null,
"unit": "USD",
"status": "derived",
"evidence_type": "published-price",
"source": "Lucid store $2,426 sale / $2,699 reg verified 2026-05-25; competitor model + min compressor spec — Derek to supply",
"audience": [
"operator",
"owner",
"distributor",
"detailer"
],
"notes": "Fill rotary_value with competitor buffer price + cheapest compressor that meets its min CFM."
},
{
"id": "edge-surface-speed-1800rpm",
"category": "finish",
"claim": "At 1,800 RPM a 7\" rotary pad has edge surface speed near 33 ft/s; a 3.5\" drum at the same RPM is half that at the contact patch.",
"metric": "Pad/drum contact surface speed at 1,800 RPM",
"drum_value": 16.5,
"rotary_value": 33.0,
"unit": "ft/s",
"status": "derived",
"evidence_type": "physics-derivation",
"source": "Surface speed = π × diameter × RPM ÷ 60. Standard kinematics.",
"audience": [
"operator",
"detailer"
]
},
{
"id": "linear-motion-no-swirl",
"category": "finish",
"claim": "The axial drum's pad travels linearly across the work, so it does not leave the circular swirl or hologram marks a spinning rotary disc can produce on aluminum.",
"metric": "Swirl/hologram risk from tool geometry",
"drum_value": null,
"rotary_value": null,
"unit": "qualitative",
"status": "derived",
"evidence_type": "physics-derivation",
"source": "Geometry: rotational vs linear contact path. Independently noted in drum-buffer product literature (AeroBuf/Frasers, BuffPro).",
"audience": [
"operator",
"owner",
"detailer"
]
}
]
}